✨ New Arrivals Just Dropped!Explore
HomeStore
Rebar Bender 1 inch 25 mm Rebar Bending Bender Rebar Grade 60 Electric Rebar Bender Heavy Duty with Foot Pedal for Bending Steel Rope (1 inch Rebar Bender)
Rebar Bender 1 inch 25 mm Rebar Bending Bender Rebar Grade 60 Electric Rebar Bender Heavy Duty with Foot Pedal for Bending Steel Rope (1 inch Rebar Bender)
$3,217,000.00
Rebar Bender 1 inch 25 mm Rebar Bending Bender Rebar Grade 60 Electric Rebar Bender Heavy Duty with Foot Pedal for Bending Steel Rope (1 inch Rebar Bender)—
$3,217,000.00
The Story
Highlights:
1.6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. Bending Angle: 0-180°, Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Item Dimensions(L x W x H): 17.72'' x 19.69 x 20.08'' / 45 x 50 x 51 cm.
2.1700W Pure Copper Coil Motor: This hydraulic bending machine features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A).
3.Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally.
4.Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste.
5.Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.
Details:
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
1.6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. Bending Angle: 0-180°, Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Item Dimensions(L x W x H): 17.72'' x 19.69 x 20.08'' / 45 x 50 x 51 cm.
2.1700W Pure Copper Coil Motor: This hydraulic bending machine features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A).
3.Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally.
4.Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste.
5.Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.
Details:
1700W Electric Rebar Bender 1" (25 mm) Grade 60
1/4'' to 1" Rebar Diameter & 6-7 Seconds & 0-180 Degrees
The rebar bender and cutter machine can bend 1/4''(#2) to 1"(#8) (6 to 25 mm) rebar to 0-180°in 6-7 seconds. Two standard foot pedal control switches for hands-free bending. This rod bending machine is multi-purpose for construction or all kinds of other things related to rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel bending. It is ideal for manufacturers who need simple, easy-to-use, consistent, and accurate steel bending machines. A must-have for the professional concrete installer!
- 6-7S Ultra-Fast Bending Speed
- 1700W Pure Copper Coil Motor
- Angle Adjustment Knobs
- Sturdy Machine Body
- Easy to Operate & Transport
VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.
Why Choose VEVOR?
- Premium Tough Quality
- Incredibly Low Prices
- Fast & Secure Delivery
- 30-Day Free Returns
- 24/7 Attentive Service
VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.
Why Choose VEVOR?
- Premium Tough Quality
- Incredibly Low Prices
- Fast & Secure Delivery
- 30-Day Free Returns
- 24/7 Attentive Service
6-7 Seconds Bending Speed
The steel rebar bender bends 1/4'' to 1" (6 to 25 mm) steel super fast in just 6 -7 seconds. Bending Angle: 0-180°. The bending speed depends on the thickness of the rebar and the angle you want to reach. Max. Rebar Diameter: 1" / 25 mm #8 Grade 60.
Two Angle Adjustors
Adjust the angle you need by moving left or right, and after angle adjustment is set accurately, ensure that the angle setting handle is fixed. When you find some abnormal during the operation, you must press down emergency stopped to close down the machine's operation.
Iron Idler Wheel
The high-strength Ø78 Gyre Idler Wheel and Ø94 Fixed Idler Wheel are made of iron materials, are more firm, and not easily deformed. Besides, exceeding designated material specifications greatly increases this risk and will also damage the tool.
1700W Powerful Motor
The rebar bending machine features a 100% pure copper core high-power motor with double endurance for high conductivity, low noise operation, high-temperature resistance, and saves energy for a long time. Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A).
Humanized Foot Pedal & Handle
The foot switch connection to point 1,2 will make it more convenient to go to work. And when pressing the starting switch or the foot switch will bend the rebar to the angle you have set. When moving the bender by fixing the handle, 4 bolts can not loose, then move the bender together by 4 handles.
Extensive Application
The hydraulic rebar bender is widely applied in construction engineering / bridge construction / railway viaduct / dock highway bridges / electric power building. Perfect for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.
Specifications
- Model: RB-25
- Voltage: 110V
- Power: 1700W
- Frequency: 60 Hz
- Amps: 14A
- Bending Angle: 0-180°
- Max. Rebar Diameter: 1" / 25 mm #8 Grade 60
- Min. Rebar Diameter: 1/4'' / 6 mm #2 Grade 60
- Bending Speed: 6-7 Seconds
- Bending Radius: 1.57'' / 40 mm
- Max. Rebar Hardness: HRC30
- Noise: 92 dB(A)
- Material: Iron
- Item Dimensions(L x W x H): 17.72'' x 19.69 x 20.08'' / 45 x 50 x 51 cm
- Packing Size(L x W x H): 19.69 x 22.05 x 22.05'' / 50 x 56 x 56 cm
- Net Weight: 200.62 lbs / 91 kg
- Gross Weight: 240.3 lbs / 109 kg
- Certificate: CE
- Application: Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc
Package Content
- 1 x Electric Rebar Bender
- 2 x Foot Pedals
- 3 x Tension Springs
- 4 x Carbon Brushes
- 1 x User Manual
VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.
Why Choose VEVOR?
- Premium Tough Quality
- Incredibly Low Prices
- Fast & Secure Delivery
- 30-Day Free Returns
- 24/7 Attentive Service
VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.
Why Choose VEVOR?
- Premium Tough Quality
- Incredibly Low Prices
- Fast & Secure Delivery
- 30-Day Free Returns
- 24/7 Attentive Service
1700W Electric Rebar Bender 1" (25 mm) Grade 60
1/4'' to 1" Rebar Diameter & 6-7 Seconds & 0-180 Degrees
The rebar bender and cutter machine can bend 1/4''(#2) to 1"(#8) (6 to 25 mm) rebar to 0-180°in 6-7 seconds. Two standard foot pedal control switches for hands-free bending. This rod bending machine is multi-purpose for construction or all kinds of other things related to rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel bending. It is ideal for manufacturers who need simple, easy-to-use, consistent, and accurate steel bending machines. A must-have for the professional concrete installer!
- 6-7S Ultra-Fast Bending Speed
- 1700W Pure Copper Coil Motor
- Angle Adjustment Knobs
Description
Highlights:
1.6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. Bending Angle: 0-180°, Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Item Dimensions(L x W x H): 17.72'' x 19.69 x 20.08'' / 45 x 50 x 51 cm.
2.1700W Pure Copper Coil Motor: This hydraulic bending machine features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A).
3.Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally.
4.Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste.
5.Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.
Details:
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
1.6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. Bending Angle: 0-180°, Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Item Dimensions(L x W x H): 17.72'' x 19.69 x 20.08'' / 45 x 50 x 51 cm.
2.1700W Pure Copper Coil Motor: This hydraulic bending machine features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A).
3.Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally.
4.Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste.
5.Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.
Details:
1700W Electric Rebar Bender 1" (25 mm) Grade 60
1/4'' to 1" Rebar Diameter & 6-7 Seconds & 0-180 Degrees
The rebar bender and cutter machine can bend 1/4''(#2) to 1"(#8) (6 to 25 mm) rebar to 0-180°in 6-7 seconds. Two standard foot pedal control switches for hands-free bending. This rod bending machine is multi-purpose for construction or all kinds of other things related to rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel bending. It is ideal for manufacturers who need simple, easy-to-use, consistent, and accurate steel bending machines. A must-have for the professional concrete installer!
- 6-7S Ultra-Fast Bending Speed
- 1700W Pure Copper Coil Motor
- Angle Adjustment Knobs
- Sturdy Machine Body
- Easy to Operate & Transport
VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.
Why Choose VEVOR?
- Premium Tough Quality
- Incredibly Low Prices
- Fast & Secure Delivery
- 30-Day Free Returns
- 24/7 Attentive Service
VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.
Why Choose VEVOR?
- Premium Tough Quality
- Incredibly Low Prices
- Fast & Secure Delivery
- 30-Day Free Returns
- 24/7 Attentive Service
6-7 Seconds Bending Speed
The steel rebar bender bends 1/4'' to 1" (6 to 25 mm) steel super fast in just 6 -7 seconds. Bending Angle: 0-180°. The bending speed depends on the thickness of the rebar and the angle you want to reach. Max. Rebar Diameter: 1" / 25 mm #8 Grade 60.
Two Angle Adjustors
Adjust the angle you need by moving left or right, and after angle adjustment is set accurately, ensure that the angle setting handle is fixed. When you find some abnormal during the operation, you must press down emergency stopped to close down the machine's operation.
Iron Idler Wheel
The high-strength Ø78 Gyre Idler Wheel and Ø94 Fixed Idler Wheel are made of iron materials, are more firm, and not easily deformed. Besides, exceeding designated material specifications greatly increases this risk and will also damage the tool.
1700W Powerful Motor
The rebar bending machine features a 100% pure copper core high-power motor with double endurance for high conductivity, low noise operation, high-temperature resistance, and saves energy for a long time. Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A).
Humanized Foot Pedal & Handle
The foot switch connection to point 1,2 will make it more convenient to go to work. And when pressing the starting switch or the foot switch will bend the rebar to the angle you have set. When moving the bender by fixing the handle, 4 bolts can not loose, then move the bender together by 4 handles.
Extensive Application
The hydraulic rebar bender is widely applied in construction engineering / bridge construction / railway viaduct / dock highway bridges / electric power building. Perfect for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.
Specifications
- Model: RB-25
- Voltage: 110V
- Power: 1700W
- Frequency: 60 Hz
- Amps: 14A
- Bending Angle: 0-180°
- Max. Rebar Diameter: 1" / 25 mm #8 Grade 60
- Min. Rebar Diameter: 1/4'' / 6 mm #2 Grade 60
- Bending Speed: 6-7 Seconds
- Bending Radius: 1.57'' / 40 mm
- Max. Rebar Hardness: HRC30
- Noise: 92 dB(A)
- Material: Iron
- Item Dimensions(L x W x H): 17.72'' x 19.69 x 20.08'' / 45 x 50 x 51 cm
- Packing Size(L x W x H): 19.69 x 22.05 x 22.05'' / 50 x 56 x 56 cm
- Net Weight: 200.62 lbs / 91 kg
- Gross Weight: 240.3 lbs / 109 kg
- Certificate: CE
- Application: Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc
Package Content
- 1 x Electric Rebar Bender
- 2 x Foot Pedals
- 3 x Tension Springs
- 4 x Carbon Brushes
- 1 x User Manual
VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.
Why Choose VEVOR?
- Premium Tough Quality
- Incredibly Low Prices
- Fast & Secure Delivery
- 30-Day Free Returns
- 24/7 Attentive Service
VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.
Why Choose VEVOR?
- Premium Tough Quality
- Incredibly Low Prices
- Fast & Secure Delivery
- 30-Day Free Returns
- 24/7 Attentive Service
1700W Electric Rebar Bender 1" (25 mm) Grade 60
1/4'' to 1" Rebar Diameter & 6-7 Seconds & 0-180 Degrees
The rebar bender and cutter machine can bend 1/4''(#2) to 1"(#8) (6 to 25 mm) rebar to 0-180°in 6-7 seconds. Two standard foot pedal control switches for hands-free bending. This rod bending machine is multi-purpose for construction or all kinds of other things related to rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel bending. It is ideal for manufacturers who need simple, easy-to-use, consistent, and accurate steel bending machines. A must-have for the professional concrete installer!
- 6-7S Ultra-Fast Bending Speed
- 1700W Pure Copper Coil Motor
- Angle Adjustment Knobs
